Fix Critical Process Died in Windows – If you are Facing Critical Process Died on Startup error and want solution for Critical Process Died then we have mentioned more than five methods to fix Critical Process Died on boot error. critical process died no safe mode available error also can be resolved using below steps.

Windows Blue screen of death [BSOD] is most common now a days. Previously we have already provided details on how to Fix irql_not_less_or_equal windows 10 Error and How to Fix Elara App is Preventing Shutdown and How to Fix Driver Power State Failure Error.

Critical Process Died indicates to a critical system process died with error code – 0x000000EF or blue screen error. When a critical system process fails to run, the operating system will crash with a Critical Process Died Stop Error 0x000000EF or Blue Screen displayed on your Windows computer.

Fix Critical Process Died in Windows

If a critical Windows system process fails to run properly, your operating system will crash and display a Critical Process Died Stop Error 0x000000EF or Blue Screen on your Windows 10/8/7 computer. This happens because the process which was needed to run the Windows operating system ended abruptly for some reason. Here’s Details on What is Akamai NetSession Interface used for?

When the Critical Process Died error happens in Windows 10, you see nothing but a blue screen with the following error message:

Your PC ran into a problem and needs to restart. We’re just collecting some error info, and then we’ll restart for you.
If you’d like to know more, you can search online later for this error: CRITICAL PROCESS DIED

Causes of Critical Process Died in Windows

If you operate many works in your computer at a time then you may face the error.
If your ram, hard drive or processor cannot work properly then your PC shows this error massage and restart suddenly.
This critical_process_died error also occurs for faulty drivers or hardware problem.

How to Fix Critical Process Died in Windows

The CRITICAL PROCESS DIED error occurs when a critical system process required for the operating system to run properly has died and due to which Windows 8.1 fails to load properly. If you have stumbled upon the “critical process died” error in Windows 10, then you know how annoying this BSOD is. below are the solutions to fix critical process died bug.

1. Use SFC /SCANNOW To Repair Windows

Sfc Scan is a great command run by CMD which can help you to repair your Windows by just typing a single command in the Windows Command Prompt.

Open CMD, as an administrator.
Then type the command “Sfc /Scannow” and hit enter. Make sure you don’t close this CMDwindow until the verification gets 100% completed.

Restart your computer and test it.
If the blue screen [Critical Process Died] has gone, then that’s good!! If don’t, then just move to the next solution.

2. Go into Safe Mode and then uninstall the driver

To fix Critical Process Died error go into Safe Mode and then uninstall the driver or drivers that are causing the problem. To go into Safe Mode from the sign in screen, follow these simple steps:

Grab your Windows 10 computer.
Restart your Windows 10 computer.
Then, press the Shift key and hold it down.
Next, choose the Power option and restart your computer.
Once your Windows 10 restart, press either the 4 key or F4. This will select the start your Windows 10 PC in Safe Mode. You could also press either the 5 key or F5, which will then go to Safe Mode with Networking.

Once you have booted your Windows 10 computer in Safe Mode follow one of the sets of steps above, follow these simple steps to uninstall the problematic drivers:

Hit the following two keys at the same time: The Windows key and the R key. This action will prompt a Run dialog to appear on your screen.
Then, type the following command into the run box: “msconfig” [no quotation marks].
Once you have typed the command in, click on the OK button. This action will prompt the System configuration window to display on the screen.
The System configuration has several tabs. Click on the Boot tab.
Check the Safe boot box.
Click on the Ok button.
Finally, click on Restart.

Once your computer has restarted, you will be in a position to uninstall the problematic drivers in total safety:

Hit the following two keys at the same time: The Windows key and the R key. This action will prompt a Run dialog to appear on your screen.
Then, type the following command into the run box: “devmgmt.msc” [no quotation marks].
Once you have typed the command in, click on the OK button. This action will prompt the System configurationwindow to display on the screen.
Next, you will need to expand the category and search for any devices (drivers) that have a yellow sign displaying next to them. This is how you will identify the driver or drivers causing the error.
Then, you will need to remove each of the problematic errors one by one by right clicking on each of them and selecting uninstall.

Once you have safely removed each and every one of the problematic drivers, you will need to restart your Windows 10 computer. If you did check the Safe boot box when you restarted your computer before, make sure that you uncheck it before restarting your PC this final time.

3. Perform Clean Boot in Windows 10

When you start the computer in clean boot, the computer starts by using a pre-selected minimal set of drivers and startup programs. Clean-boot troubleshooting is designed to isolate a performance problem. Both Safe Mode and Clean Boot should temporarily fix the Critical Process Died error, allowing you to apply the solutions described below.

Open the start menu and type “msconfig.”
Hit enter to open the System Configuration application.
Go to the Services tab and check the Hide all Microsoft services option.

Go to the Startup tab and click Open Task Manager.
Disable all services you see.
Restart your computer and see if Critical Process Died error has resolved or not.

4. Check and Fix Faulty Driver

go to Windows Start menu and type Device Manager in the Search box then click on the Device Manager from above options.
Now you click one by one arrow sign from left side bar that showing the chipset and hardware drivers.
And identify the faulty drivers from there that has a yellow triangle to near the drivers name like bellow image

You need to Uninstall these drivers and then again update them manually.

5) Now Restart your PC and now you need to install drive again.

You can Manually Update your Driver or There are Many Softwares to do the Same. If you have less drivers in your PC then you can Update them Manually to Fix Critical Process Died error.

5. Do a System Restore

You can restore your windows to previously working Time. Every system generates a system restore Points so if your System Protection is turned on, Windows will create a restore point before you install the driver. Then you can follow these steps to restore the driver to earlier version to fix this issue.

1) Press Win+R (Windows logo key and R key) at the same time to invoke a run box.

2) Type rstrui.exe and click OK. The System Restore Window will open.

3) Click Next then you may see the following screen. Select a restore point that was created before the error occurred. Click Next to continue and follow the on-screen instructions to finish the restore.

4) Reboot your PC and check to see if the problem Critical Process Died Error resolved.

Hope this method to fix Critical Process Died Error works for you.

6. Check for BIOS update

The BIOS (Basic Input/Output System) incompatibility, memory conflict or the IRQ (Interrupt Request) conflict can be the cause of the Critical Process Died error. So you can try to update the BIOS. You can go to the motherboard manufacturer’s website to check for the BIOS update. Before you head to the website, ensure you know the product name of the motherboard.

If you have no idea the model number of the motherboard, follow these steps:

1) On your keyboard, press the Windows Logo key and R key at the same time to invoke a run command.

2) Type cmd and press Enter.

3) Type below command line or just copy and paste it to the command prompt. Then you’ll get the motherboard manufacturer and the model product number.

wmic baseboard get manufacturer, product

4) You will find the manufacturer and the product number from the CMD.

BIOS downloaded file is either in .zip format or in .exe format. It’s a little complicated to install the BIOS. The manufacturer provides the installation instructions on their website. You should be able to see it when you head to the BIOS download page. Just follow the instructions to install the BIOS. If you’re not comfortable installing BIOS yourself, please contact the manufacturer to help with that.

7. Install Latest Chipset and Hardware Drivers

This is a simple method but you need time to implement this method. If you can’t identify the faulty drivers then you apply this method. At first you go to your Windows control panel and then uninstall the entire network, sound and others chipset and hardware drivers then download the latest and updated new drivers (Matching with your PC configurations) and install them that obviously fix this error.

so these are some methods to fix Critical Process Died error in windows. If you still are facing any issues then comment below and we will try to resolve your queries.

The post Fix Critical Process Died in Windows (Resolved) appeared first on Tricks By STG.

from Tricks By STG https://www.tricksbystg.org/fix-critical-process-died/
via IFTTT

Fix Critical Process Died in Windows (Resolved)